Jump to content
Ddjsck

Help with stuck desert eagle

Recommended Posts

Ddjsck

D44E4EF5-829E-4F80-BC3D-BA8B35F8CBAA.thumb.jpeg.5db2b781c0b3df625b58159904d60247.jpegNew cybergun we desert eagle. Fire couple shot and slide got stuck. We I took the slide off and try to see if these anything stuck. As I was trying to see if the spring is in proper place so I put the slide back in with out the barrel now the slide is stuck in a awkward position. I can’t take the slide off. Please someone help.

9B518A2F-D6CA-41F6-BD1F-9BF96403EE4F.jpeg

Share this post


Link to post
Share on other sites
Bear

I've never worked with a Desert Eagle, so grain of salt.

Is your slide completely seated in the rail grooves on the frame?  If not, try twisting the slide until it seats properly.

If you look down the magazine well, can you see anything that might have jammed the slide?  Look especially at any internal parts of the slide stop lever.  If anything is caught you may be able to separate them with CAREFULLY with a screw driver.

Check the disassembly lever as well and make sure it didn't catch on something it's not supposed to.  Without the outer barrel in the gun it might have levered itself into a position its not designed to be in. 

Best I can think of without having it in hand. 

 

Share this post


Link to post
Share on other sites
Ddjsck
On 4/14/2020 at 10:07 AM, Bear said:

I've never worked with a Desert Eagle, so grain of salt.

Is your slide completely seated in the rail grooves on the frame?  If not, try twisting the slide until it seats properly.

If you look down the magazine well, can you see anything that might have jammed the slide?  Look especially at any internal parts of the slide stop lever.  If anything is caught you may be able to separate them with CAREFULLY with a screw driver.

Check the disassembly lever as well and make sure it didn't catch on something it's not supposed to.  Without the outer barrel in the gun it might have levered itself into a position its not designed to be in. 

Best I can think of without having it in hand. 

 

Hi thx for reaching out. I just fix the issue. I had to use a screwdriver to force the spring out and that was it. thanks anyway I appreciated: 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...