Search the Community

Welcome to my WTS thread. I have a variety of guns, gear, and parts for sale. This list will likely be periodically updated. Feel free to PM me for any additional details. Prices are negotiable. Pictures of everything can be found at the link below. http://imgur.com/a/n6nKA Elite Force 1911 Tac - $80 - custom wood grips. - includes standard and extended magazines - includes barrel thread protector - "rebuild kit" installed (mostly new springs) KJW KP-05 - $100 - aftermarket WE threaded outer barrel - aftermarket fill valve o-rings - includes 2 green gas magazines Ferro Concepts Kydex Triple Shingle M4 kangaroo insert - $45 - check the Ferro Concepts website for sizing. - Should fit almost any kangaroo mag pouch on a JPC Blackhawk Double Stack 1911 Kydex Mag Inserts - $15 - holds 2 hi-capa magazines. Gate NanoHard Mosfet - $25 - pre soldered onto v2 trigger contacts - can remove contacts and external tape (used to protect wires) KWA K120 (X3) - $20 - Moderate Use. Minimal Wear. Prometheus 6.03 SS TTB (247MM) - $40 PDI R-Hopped 6.05 SS TTB (300mm) - $80 Madbul Ultimate Hop Up (M4) - $20 Magpul MOE adjustable Stock - OD green - $20 Plate Carrier Back Pannel Pack & 3L bladder - $30 - Multicam - Carries 3L bladder - 3 compartments - attaches via molle Condor Dump Pouch - $10

Title says it all my friends! It has been a real fun ride with everyone I've met throughout the couple years I've played with you all, but it's time to move on. Bills, other priorities, and life in general has taken afoot. First and foremost though, EVERYTHING MUST GO, and that means I'm not trying to make a profit from anything in this thread. I'm simply trying to clean house, and hopefully some of you guys can make use of what I have! All prices will be and are negotiable so please please please, if you have any questions on anything don't hesitate to ask! Here we go: A&K Masada (ACR) Since I last used it at OP: Irene it chrono'd around ~310 fps with .25's. $260 with everything shown here, or $180 for just the gun, magazine, battery, charger, and unjamming rod. Unfortunately I broke the feeding lip at OP: Irene and haven't gotten a new one. I will flex on price heavily if need be. I also have all the stock internal parts as well (motor, gears, shims, springs, etc.), those will be thrown in with purchase of the gun. Internals: Madbull 6.01 tighbore barrel SHS super shooter 18:1 gears Lonex shims G&G high torque motor Externals: Madbull compensator Replica EOTech: $30 REAL Magpul RVG (with added rail shown on gun): $20 Offset flashlight mount: $10 (I'll throw in the flashlight too) Gun bag: $25 I'll bundle the bag with everything above for $300 OBO 9 Elite Force mags: $5 each or $40 for all of them. Magpul RSA: $20 Baofeng UV5R radio: only used once at OP: Irene. In perfect working order $25 Unbranded skull metal mesh mask: $5 2 bags of Bioshot bb's (unopened): $10 each, third bag of Biovals is FREE! It's about half full. Please disregard magazine, it has been sold as this is an old photo. AMP free float rail: $25 DBoys replica PEQ-15 battery box: $5 Magpul PTS M4 grip: $10 4 REAL Magpul ladder rail covers (never used): 2 Dark Earth, 1 Foliage, 1 Black: $5 each Condor Outdoor radio pouch: $5 Unbranded throat mic (works flawlessly, and only used once): $10 I can bundle this mic with the Baofeng radio if buyer is interested. Lancer Tactical chest rig/RRV with pouches: $80 Seperate pricing: Lancer Tactical chest rig/RRV with hydro carrier and bladder (bladder not shown): $30 Condor Outdoor admin pouch: $5 Condor Outdoor sidekick pouch: $10 Condor Outdoor double stack M4 mag pouches (x2): $10 each 5.11 radio pouch: $5 Condor Outdoor dump/recovery pouch: $5 This can also be bundled in with above gear at buyers request. I'm pricing everything to move, and all the above prices are OBO for that reason. I'm willing to drive certain distances to meet with buyers for everything, cash is king, or Paypal. NONE of these prices include shipping, so the buyer pays for that. Again, thank you to everyone for making this such a fun time, I had a blast! Feel free to ask any questions in case I missed something or aren't sure about something. Last thing: keep an eye out on this thread for I may be adding some more to it in the near future. Happy shopping!

As some of you guys know, today my Elite Force midcap magazines did not want to feed.. it has nothing to do with them not fitting correctly in my gun (A&K Masada) because they do very well. What is happening is that the bb's I'm using (Bioval .25's) are double stacking themselves in the mags before they get the feeding tip. Is there anyway I can combat this? Unfortunately I didn't get a chance to put any silicone oil before the game, so it may be that. But any other suggestions as to why they could be doing that? Any help would be great! I bought these brand new and today was the first game I've used them, so I'm bummed they didn't work..

What is your opinion about having a GBB pistol as a secondary? What brand and make do you own? How is it? What would you purchase in the future? I think having a secondary GBB pistol is very useful especially in CQB situations for room clearing and anytime you are in such a tight spot you can't even reload your primary. One time I even used mine for most of the day because of a stripped piston on my AEG and it was fun!!! I personally own a WE 1911 KB custom and have used it for a few games already, the model is very sturdy in construction and easy to maintain (just need to oil the the slide and places after/before each game. It is a great pistol for the prize it was ($88) I would personally want to purchase a SAI glock, KWA m9 tac or a elite force 1911.

Hello Airsofters of Indiana! Glad to join you guys! I have been deciding on a new AEG rifle since my Echo 1 AMD 65 recently failed on me at the middle of a game in September. I have been debating on getting a Krytac CRB or a Elite force (OEM: VFC) Hk 416 cqb elite. Which one do you think i should get?

My son has a EF 1911 with a spring(1.5mm×30mm) that I found smashed by the nozzle. I am guessing it is for the nozzle return. Does anyone no where a part diagram can be found, or if its compatible with other manufactures .

Okay it's time for me to pick at some of your airsoft knowledge gents. I'm looking to supplement my airsoft arsenal with a new M4 because my project gun isn't going anywhere.. I have found a couple that I'm interested in and are close enough to my price range to consider purchasing here in the next few months (hopefully to be ready and used by BF 11) First up is this one: reason why I chose it was because I love the show, and being it's backed by Elite Force/Umarex I feel that it should be reliable as well as easy to maintain. http://www.evike.com/products/44785/ Up next: this one because I've heard nothing but good things about G&P, inside and out. Again, it has really cool logos on the receiver which was what had me sold on it. http://www.evike.com/products/32129/ Any kind of insight, constructive criticism, likes/dislikes, or anything at all will be helpful. Thanks in advance gents!

Okay, this is a bit of a multi faceted question/situation. I have an AGM M4 that is still a semi work in progress and I plan on making into a DEVGRU style platform. It's at a stand still now because I've found out the hard way that the Elite Force mid cap magazines DO NOT fit, and I mean not even close. They barely make it past the flared opening of the mag well. Now comes my dilemma.. Does anyone know if any brand metal lower would fit an AGM M4 metal upper? With relative ease of modification. If that isn't an option, how about any brand metal body altogether which will fit a front wired, AGM M4 metal gearbox? Finally, would the answer to either question above accept Elite Force mid cap magazines? What I'm trying to do is avoid using one set of magazines for one gun, and another set of magazines for another. I apologize for the long winded post, but I had to get something out there because I've been unable to find an answer yet anywhere..