Jump to content

PELI

Global Moderator
  • Content Count

    1,592
  • Joined

  • Last visited

  • Days Won

    40

Everything posted by PELI

  1. after a ankle injury last year at work and moving on to other things and getting burned by a few shitlords when fixing their guns and moving in a month. I'm trying to sell off a large part of the gear I amassed over the last 10 years I'm going to sell off my few big boxes and totes of parts I have a box with MP5 parts including a TM body and hopups enough to build 1 or 2 guns 70$ next a box of M4 parts have 3 full body sets 2 CAs and a nice G&P or guarder that was top of the line a few years back.150$ a box of AK parts with a cyma krink in parts 100$ I have a original Dboys AK that was the true steel clone of the VFC steel bodies has hopup issues 100$ ICS original ak with air seal issue 80$ the ak M60 vn 250$ 8mm tri shot gas shotgun acm with real moss-burg furniture and slide rails modded to fit gun 150$ Dboy ak under folder airseal or hop up issue 70$ Dboy side folder 70$ original Hurricane M16 body kit with VFC barrel and furniture 150$ 4 or 5 Thunder Bs 12 pks of shells with co2 and core 40$ ea 1 thunder V core and 12 shells and co2 35$ I also some of the cores were used one time might sell a really nice ICS MP5 with 5 or 6 mags and some extras make a offer TM m4 with original box will come with a extra TM gun minus the gearbox and second gun had the trade marks removed when imported has a 2 roy M203 mounted to it and will come with 1 gas grenade 200$ ICS M203 rail mount painted tan that is faded/worn off in places 3 Ics nades 125$ with option to buy 3 or 4 more madbull nades for 15$ ea HFC M11 GBB with 2 or 3 mags 65$ works great I also have a big lot of internal parts boxes of new and lightly used stuff hop ups buckings pistons gears gear boxes 300$ I can also make 3 or 4 guns as build kits for people if they want a gun to tinker with the high end bodies with everything included to make a complete gun for 65$ ea I have more stuff that I have to look through I will not ship you come too me and my prices are firm you low ball me and I'll have Harvest go mid evil on that ass. this stuff is up for the next month after that it all goes into storage if you want to look at something after june there will be a 20$ fee for me to rummage through the unit to find it I have a whole Office full of gear
  2. due to a ongoing reoccurring ankle injury I won't play but might show up for the BST with a crap ton of parts boxes full of M4 and ak and Mp5 stuff
  3. PELI

    Fps Issue

    ICS is good at throwing in proprietary parts like tappet plates, air nozzles , selector plates and hopuos i have a big box of MP5 parts including 1 or 2 Ics TM and some JG part including hopups if you want to try one out
  4. bump price drop 250$ need money for vet bills this is a brand new out of production VFC
  5. PELI

    A&k M60 Vn

    bump price drop 250$ need money for vet bills
  6. PELI

    Overall Nato Setup

    both are going out of business
  7. you can only broadcast on the chosen channel if you're on A you can only talk on A but can listen to B and vise versa. did you manually enter every station ? or use the programming cable?
  8. bumpski i'll take 60$ for the G&G m4 50$ for the cyma ak 200$ each for the inokatsu's 80$ for the ISC ak 180$ for the gas trishot shot gun also have a Dboys full metal under folder ak 85$ I also have 2 Classic army full metal bodys one with a carbine length front and one with a 10inch 60$ ea if there's anyone that likes building guns I have enough stuff to build 2 or3 M4 and 2 MP5s with lots of extras I could make a very large parts lot including a few ver2 gearboxes and internals https://postimg.org/image/7hrcivgtt/ I can also now meet most weekdays in bloomington I'm soon going to put lots of this stuff up on ebay
  9. what probably has happened is one cell has dropped below what the charger deems safe to charge do at your own risk but I've had good luck with charging a "dead cell battery" by using a normal charger that doesn't charge and balance each cell at the same time I use one of these to see what each cells at and if one cell is at close to capacity i discharge it so I can try to get the other cell back up http://www.ebay.com/itm/like/311629363314?lpid=82&chn=ps&ul_noapp=true once you can get the bad cell up over 3 volts you can usually put it back on the smart charger and get it to recharge. but the amount of money you will spend on a balancer and another charger you could buy a few new batteries the main chargers I use are MRC 992 and 959 I also sometimes use a hobbyking dc-4s
  10. https://indianapolis.craigslist.org/zip/6052362085.html
  11. https://bloomington.craigslist.org/zip/6066986914.html
  12. PELI

    A&k M60 Vn

    bump ammo trades are less than cash price
  13. http://www.ebay.com/sch/i.html?_odkw=&_sop=1&_mdo=Sporting-Goods&_trkparms=65%253A1%257C66%253A1%257C39%253A1&_pcats=159043%2C382&_osacat=31680&_from=R40&_trksid=p2045573.m570.l1311.R1.TR12.TRC2.A0.H0.X1911.TRS0&_nkw=1911+grips&_sacat=31680
  14. PELI

    A&k M60 Vn

    looks like I'm not going to build a technical any time soon would rather sell this and someone use it gun is complete except for bipod it is broken on one leg and wont lock and is now ziptied to the gun. 300$ 350$ with gooseneck pintle mount small section of bullet links with fired blanks and 5000 mah battery that should still be good I'll chrono the gun tomorrow think it shot 380 last time i checked. http://www.airsoft-indiana.com/forum/uploads/gallery/album_91/gallery_19_91_298306.jpg ALSO NO airsoft trades of any kind I'll trade for bulk brass 1200 rnds 9mm win or rem or1300 rnds OR 7.62x39 wolf or tula or 1200 rnds of 180 gr 40 sw rem federal or win like all my other sales I'm not traveling if you re a known time waster or tire kicker I will ignore you if you ask stupid or obvious question that can be found on google you will be ignored, I'm not going to spoon feed you!!! must be 18 or have a parent present
  15. yes I have it wasn't planning on going older ICS its got some after market parts in it don't ask me what as I got it used it had or has a BB feeding issue it has been sitting for a year or 2 and I have no desire to mess with it. I kind of remember replacing the tappet but it might need a ICS air nozzle will also come with a second brand new lower receiver. ICS has proprietary parts when it comes to tappets air nozzles and hop ups, not sure about the gearbox shell.
×
×
  • Create New...