Spectre Posted August 21, 2012 Share Posted August 21, 2012 I believe this issue to reside in the gun itself and not the magazines but everytime I fill a mag and put it in its fine. However, once I chamber a round a fire it barely lets out any gas on the first shot. After that it won't even fire, but when pulling the slide back you hear a little pop which I assume to be gas escaping. I know nothing about gas gun internals so any help would be appreciated! Quote Link to comment Share on other sites More sharing options...
Eagle Posted August 21, 2012 Share Posted August 21, 2012 This is a common problem with the KJW glocks, unfortunately I'm not totally sure what it is. Have you tried cleaning the internals or using a different magazine? You're valve knocker might also be in need of repair Quote Link to comment Share on other sites More sharing options...
Spectre Posted August 21, 2012 Author Share Posted August 21, 2012 Appreciate the reply. I've cleaned it and used a couple different mags. It may very well be the knocker. I'll do some more rigorous google searching and seeing what else I can find. Quote Link to comment Share on other sites More sharing options...
-Rogue- Posted August 21, 2012 Share Posted August 21, 2012 It is likely your fill valve on the magazine. **I am assuming that you only have one That is basically happening, is that it is letting in only a very small amount of air to the magazine. It will need to be removed and cleaned/replaced. Quote Link to comment Share on other sites More sharing options...
Spectre Posted August 24, 2012 Author Share Posted August 24, 2012 It's doing the same thing on both of my mags. It'd suck for both of their fill valves to be messed up. I don't use it anymore since I got my ATP but it would be nice to get it back up and running again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.